carbon MTB handlabar
mtb handlebar
MTB Carbon handlebar

15/25/30mm Rise Carbon MTB Handlebar

  • Optional rise
  • MTB handlebar
₩195,000
₩195,000
Size: 15mm rise
Subtotal: ₩195,000
10 customers are viewing this product

Shipping

15-year Quality Assurance

Premium Material

MTB Carbon handlebar

15/25/30mm Rise Carbon MTB Handlebar

₩195,000

15/25/30mm Rise Carbon MTB Handlebar

₩195,000
Size: 15mm rise

The ICAN Carbon handlebar is built to conquer the gnarliest of downhills and mind warping speed. Speed is fun, but being able to maintain control while going fast is equally important. At 800mm wide and with 30mm of rise the ride is responsive, comfortable, and completely under the rider's command. A 35mm bar clamp diameter and uni-directional carbon layup allow chatter and vibrations to be soaked up while remaining reactive to handlebar input. The high performance handlebar are here to help set your top speed.

Features:

  • Designed for DH, Enduro, and All-Mountain Cycling
  • Damping properties reduce hand fatigue
  • Textured non-slip stem clamping surface
  • Recommended max torque range is 4 - 4.5 Nm
  • Follow the performance of unidirectional carbon constructiono:lightweight and high strength
  • Oversized 35mm Bore Carbon Handlebar
  • Developed and designed exclusively for MTB rider
  • Unidirectional Carbon Construction
  • The strongest 35mm Downhill/Enduro Carbon Handlebar on the market!   

Specs:

Type: Full Carbon MTB Handlebar 

Material: Full Carbon

Finished: UD Matt

Weight: 222g (15 rise )/231g (25mm rise)/254g(30mm rise)

Width: 810mm

Clamp Diameter: 35mm

Additional:

Unidirectional carbon construction provides the ultimate combination of strength, weight, and ride quality.You can wholesale carbon handlebar here too.


What rise size you should choose
Depends on your Bicycle type.The more rise size,the more backwards for your gravity.This places the weight even further back, allowing the rider to get back out over their rear tire—important on steep descents.

Warranty Policy

Every ICAN frame and rim has a useful product life cycle. Each bike, frame and rim will have a unique identification number and warranty card. Complete the provided card and warranty form, and send them to us. Failure to use the provided warranty card will void your warranty. Save your dated receipt for proof of purchase.

Product Group:

Frame and Rim

Applies to all ICAN and Triaero brand bike frame, and FL Max series, AERO Series, and Alpha series rim.

Coverage: 

2-year warranty from the date of purchase.

Conditions:

  1. If any manufacturing defect occurs within 30 days of the date of purchase, is obligated to replace the rim(s) and also pay for the shipping cost. If any manufacturing defect occurs after 31 days and up to 2 years, ICAN is obligated to replace the product(s). The product owner is responsible for shipping costs.
  2. If we no longer make the rim you purchased we’ll upgrade you to the newest equivalent model at no extra cost.
  3. The Warranty program is not transferable and only applies to the initial purchaser.

This warranty does not cover:

  • Normal wear and tear (bearings, spokes, nipples, brake tracks, tires, inner tubes, pawls, freehub, seals, rim tape etc.)
  • Products which have been incorrectly installed and/or adjusted.
  • Issues brought about by neglect or poor maintenance.
  • Surface finish and cosmetic treatments (anodizing, decals, etc.)
  • Crash damage.
  • Consequential or incidental damages (where applicable)
  • Products purchased “second-hand”, “used”, “as-is”, or expressly “without warranty”
  • Counterfeit products
  • Unauthorized modification or alteration, including without limitation, any repair performed by anyone other than ICAN or an ICAN-authorized servicer, or outside of the recommendations of ICAN Customer Service

Tips:Please contact the official support of ICAN at the first time when you find a quality problem. Please do not repair our products privately, otherwise we will not bear any warranty.

The following will void your warranty

  • Misuse (Jumping, trick riding, etc.)
  • Modification of wheels
  • Tire pressure exceeding 140psi
  • Improper assembly
  • Installation of parts or accessories not originally intended for, or not compatible with the wheelsets sold.
  • Use of brake pads not designed for carbon wheels

More details can be known from "Warranty & Return".

Related Products

Recently Viewed Products